RC ADVENTURES - TOYBOTA - BBC TOP GEAR TRUCK BOAT TRiBUTE - Toyota LC70 UTE w/ Oversized Outboard
TODAY We LAUNCH! With a True TOP GEAR Tribute - We are set to try and cross the giant water hole behind our home - with our 1/10th scale electric "Toybota" that I have been building. With a HUGE Electric Outboard Motor on the back, simulating the Giant Honda 225 hp
Jeremy Clarkson insisted he had on the back of the original Hilux Toybota, (as well as the Nissan "Nissank"), in the Car Boat Challenge episodes. Both of those episodes were some of my favourite. They inspired me to see if I can do it with a model. A challenge to be sure - but I think it can be done!
Here are the BBC Videos of Reference
BBC Top Gear Car-Boat Challenge: Toyota "Toybota"
BBC Top Gear CAR/Boat Challenge: Nissan "Nissank"
Over the last 10 days, I have built a Tribute Truck to this side segment of the Top Gear show - choosing theToyota Land Cruiser LC70 - as a Mix between the Two Trucks Jeremy was Captaining. My truck has cable driven steering for the outboard motor, and a seat for the driver. (That was in tribute to the Toyota Hilux) - The Outboard Pontoons, and Color were in Tribute to the Nissan. Both of these trucks come together for me in the Toyota LC70.. What a crazy build challenge!
As this is my first test for the truck - I have learned a lot. #1 - IMPORTANT: I have to fix the rogue leak. #2 - I now understand more of the dynamics and difficulty of getting this to work in full size, and modelling. The weight of the giant outboard engine causes a lot of downforce when under throttle. The Truck Bed is not very high, and can start to take on water if not properly balanced. But.. Lift the Tray/Bed of the truck up too much - and run the risk of the nose starting to "submarine".
Depending on the pitch of the outboard Motor depends on the amount of downforce you get - but, but event the stock shape of the front bumper of the truck- with too much applied power.. you start to "plow", and submerge.
I believe there is a "sweet spot" on the throttle, with a consistent speed. I am tempted to switch my Radio Controls around - so my outboard is not on a spring loaded throttle.
If you watch Jeremy in the Second Episode, (with the white Nissan), you can note that he keeps ca constant velocity. They joked about the speed in the episode... it is quite slow, but - I keep in mind the weight ratio, and shape of the vehicle. There are many similarities of the challenges that they had with the idea, as I ran into. Shape, thrust dynamics, flotation, leaking water, etc..
I will keep working on this project... I think I can do a "Channel Crossing"... I just have to work out a few bugs in my Toybota System.
But! Overall the Maiden Voyage went Great! Both Times, I was surprised that the rotating wheels actually moved the truck forward. Interestingly, when trying to maneuver the truck under the power of only the wheels - I had to turn the front tires in an opposite direction of the way I wanted the truck to go. When I think of the water flow, it makes sense though.
When I first climbed out of the water with the truck under power.. it was a very cool feeling. The pond is 30 feet deep!! And if we lost the truck, it would have been gone forever.. The risk was worth it, if it made you smile while watching!
THANK YOU SO MUCH for all of your Support through out this build series - and for Helping family show, RC ADVENTURES reach 1 BiLLiON viewers! That is so incredible.. we are honoured you have invited us into your lives. Thank you for sharing in ours!
If you Missed the Build of this Truck, and want to see it in detail, here is a playlist we created for you:
Now Quit Reading.. and Turn Off your Computer, or device!
GET OUTSiDE AND ENJOY THE HOBBY OF Radio Control!
See in you in the NEXT EPiSODE of RC ADVENTURES!
PS - If it is You Jeremy, Richard, or James - Reading this, or seeing this film - I want to send out a THANK YOU from all of your viewers world wide - for inspire us all to do wild and crazy things with vehicles! :)
RC ADVENTURES™/ RCSparks Studio™ © 2017 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without the prior written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series broadcast on YouTube is intended for entertainment purposes only.
Jeremy Clarkson insisted he had on the back of the original Hilux Toybota, (as well as the Nissan "Nissank"), in the Car Boat Challenge episodes. Both of those episodes were some of my favourite. They inspired me to see if I can do it with a model. A challenge to be sure - but I think it can be done!
Here are the BBC Videos of Reference
BBC Top Gear Car-Boat Challenge: Toyota "Toybota"
BBC Top Gear CAR/Boat Challenge: Nissan "Nissank"
Over the last 10 days, I have built a Tribute Truck to this side segment of the Top Gear show - choosing theToyota Land Cruiser LC70 - as a Mix between the Two Trucks Jeremy was Captaining. My truck has cable driven steering for the outboard motor, and a seat for the driver. (That was in tribute to the Toyota Hilux) - The Outboard Pontoons, and Color were in Tribute to the Nissan. Both of these trucks come together for me in the Toyota LC70.. What a crazy build challenge!
As this is my first test for the truck - I have learned a lot. #1 - IMPORTANT: I have to fix the rogue leak. #2 - I now understand more of the dynamics and difficulty of getting this to work in full size, and modelling. The weight of the giant outboard engine causes a lot of downforce when under throttle. The Truck Bed is not very high, and can start to take on water if not properly balanced. But.. Lift the Tray/Bed of the truck up too much - and run the risk of the nose starting to "submarine".
Depending on the pitch of the outboard Motor depends on the amount of downforce you get - but, but event the stock shape of the front bumper of the truck- with too much applied power.. you start to "plow", and submerge.
I believe there is a "sweet spot" on the throttle, with a consistent speed. I am tempted to switch my Radio Controls around - so my outboard is not on a spring loaded throttle.
If you watch Jeremy in the Second Episode, (with the white Nissan), you can note that he keeps ca constant velocity. They joked about the speed in the episode... it is quite slow, but - I keep in mind the weight ratio, and shape of the vehicle. There are many similarities of the challenges that they had with the idea, as I ran into. Shape, thrust dynamics, flotation, leaking water, etc..
I will keep working on this project... I think I can do a "Channel Crossing"... I just have to work out a few bugs in my Toybota System.
But! Overall the Maiden Voyage went Great! Both Times, I was surprised that the rotating wheels actually moved the truck forward. Interestingly, when trying to maneuver the truck under the power of only the wheels - I had to turn the front tires in an opposite direction of the way I wanted the truck to go. When I think of the water flow, it makes sense though.
When I first climbed out of the water with the truck under power.. it was a very cool feeling. The pond is 30 feet deep!! And if we lost the truck, it would have been gone forever.. The risk was worth it, if it made you smile while watching!
THANK YOU SO MUCH for all of your Support through out this build series - and for Helping family show, RC ADVENTURES reach 1 BiLLiON viewers! That is so incredible.. we are honoured you have invited us into your lives. Thank you for sharing in ours!
If you Missed the Build of this Truck, and want to see it in detail, here is a playlist we created for you:
Now Quit Reading.. and Turn Off your Computer, or device!
GET OUTSiDE AND ENJOY THE HOBBY OF Radio Control!
See in you in the NEXT EPiSODE of RC ADVENTURES!
PS - If it is You Jeremy, Richard, or James - Reading this, or seeing this film - I want to send out a THANK YOU from all of your viewers world wide - for inspire us all to do wild and crazy things with vehicles! :)
RC ADVENTURES™/ RCSparks Studio™ © 2017 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without the prior written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series broadcast on YouTube is intended for entertainment purposes only.
Recipes
Puddings and desserts recipes
Summer berry shortbread
Tray bake recipes
Party time chocolate fridge cake
Tart recipes
Maple pecan sticky bars
Sweets recipes
Cute chick cake pops
Biscuit recipes
Barnet sugar cakes
Cake
Banana loaf
Cupcake recipes
Amaretto pineapple cupcakes
Sweet dough recipes